• More than one raytrace model was used in the report. Where older models are used, any expected differences the newest model would make to the results should be indicated.
• For chapters taken from the preliminary report, any Future Work type sections must be updated.

• Introduction
• Summary
• The HXDS Solid State Detectors
• Deadtime and Pileup Correction in the HXDS FPCs and SSDs
• High Speed Imager Calibration
• Simulations
• HRMA Effective Area: SSD C-continuum Measurements
• HRMA Effective Area: Spectral Line Measurements
• Fitting the HRMA Effective Area
• Wing Scans: Data Reduction and Pinhole Effective Areas
• Wing Scans: Analysis
• Encircled Energy
• Off Axis Effective Area
• HRMA PSF
• Ghost Rays
• Analysis of the "Mesh-Plane" HSI Image
• Off-Axis Images
• Predictions of the On-orbit Performance
• HRMA Focus Measurements and Raytrace Update
• Rigid-Body Misalignment Parameters
• HRMA Tilts at XRCF
• HRMA Off-Axis Focal Positions
• Internal Tilt-Compensated Coma-Free Decenter of the AXAF mirrors

There was talk of including information from VETA-I in this chapter. It has seen some reorganization (things were moved to appendices.) The tests matrix should probably be moved to an appendix as well, although the description of the tests should stay here.

None as yet.

\subsection{Icing}

Description of the detector and modeling of ice build up (we hope).

Trends of ice build up as a function of time

Nice plots again, etc.

[??]

This appears to be unfinished. The text requires clarification, and some of the figures contain errors. It is unclear if this will actually be done.

[IE]

[DJ]

The latest models with the new synchrotron reflectivity should be incorporated.

[PZ]

Incorporate DCM results.

[RJE]

This chapter needs to be linked with the simulations chapter, perhaps. It needs more context. It is somewhat historical at present.

[TJG]

[TJG]

The latest raytraces must be incorporated.

[DJ]

This chapter has not yet been written. Our simulations are at an advanced state, and we should be able to begin writing this one shortly. [DJ, KM]

This chapter has not been brought over from the preliminary report, as the models have changed dramatically. As time permits, I intend to work on this, including the LRF results.

[DJ]

This chapter has not yet been written.

This chapter is unfinished. TJG is performing more analysis, and by the looks of the text, has created more questions than answers.

[TJG]

A lot of images, but not much text. TJG is working on this at some level. Needs to be redone(?) because of new HRMA pointing information.

[TJG]

Not written yet. Incorporate PZ's on-orbit hrma stuff as well as some of the off-axis effective area from here

[DJ]

• Fix EKCHDOS06 script to use offsets, datum A and mirror length to calculate z0.
• Documnet second and tird order assembly strain coefficients which were estimated from HATS data
• Redo focus simulations using finite source size
• See if new alignment values cause change in focus.
• Check mirror offsets with the EKC values from Keith Havey

It should be made clear that these parameters are the basis for the alignment parameters used in the raytraces, and that they have been augmented by the axial parfocalization and decenter data. In particular the Future Directions section should be updated. The word preliminary is scattered about; if these studies haven't been redone, perhaps that word should be removed or changed in tone.

[TJG]

Rerun tilt simulations with finite source size and current quadrant shutter model, rather than simple "wedges".

[DJ]

Rerun tilt simulations with finite source size, current quadrant shutter model, and current XRCF configuration (that used in the chapter didn't include the decenters and tilts).

[DJ]

Terry's latest results should be incorporated. The Future Directions section should be updated.

[TJG]